有声小说下载,盛世嫡妃凤轻小说

中文

Cup-shaped without valve mask

[Model] FLY-BX-5A
[Class]: FFP3 NR
[Packing Specifications]:15PCS/Box
[Size] 15.3cm * 14cm * 6cm
[Compliant to EN Standards]: EN 149:2001+A1:2009

EU DECLARATION OF CONFORMITY

DETAIL

【Indications For Use】The protective mask is intended used for protection against solid and oily particulates, liquid and microorganisms such as coal dust, cement dust, acid fog, paint fog, oil smoke, oil mist, asphalt smoke, coke oven smoke etc. Single-use.
【Limitations】Not suitable for working places where open flames exist (such as welding,casting,etc,); It is not suitable for professional protective use such as oxygen deficient, toxic gas environment. No medical use.
【Checks prior to use】Please check whether the packaging is damaged, whether the mask body is damaged, deformed or has other obvious defects before use.
【Transporting】When transporting this product use original packaging provided.
【USE CAUTIONS】 a）Please check fit of mask prior to use;
b）It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal；
c）Please do not use the mask under low air quality condition, such as serious contaminants in air, oxygen deficiency;
d）Do not use the mask in explosive atmosphere;
e）After use, please discard the mask following local regulation;
f）The mask is only for single use, do not use repeatedly.
g) DO not use the same respirator for more than 8 hours continuous or intermittent, in dirty workplaces that could result in high filter loading.
h) The maximum service time of this respirator is five(5) consecutive calendar days(including days of non-use),beginning from the first day of use.
See information supplied by the manufacturer.

Fitting

STEP 1. Hold the respirator in hand with the nosepiece at your fingertips,allowing the headbands to hang freely below your hand.
STEP 2. Press the respirator firmly against your face with the nosepiece on the bridge of your nose.
STEP 3. Stretch and position the top band high on the back of the head.Stretch the bottom band over the head and position below your ears.
STEP 4. Using both hands,mold nosepiece to the shape of your nose .
STEP 5.TO test fit:a)Cuo both hands over the respirator being careful not to distrub position,and b) inhale vigorously.if air leaks around the edges, reposition the straps or adjust strap tension for better fit.
Please carefully follow these fitting instructions during each use to achieve proper fit. Storage Condition: : The product should be stored in a well ventilated, dark and dry environment. Keep away from fire, pollutants and possible pollution sources. Also, the transport storage ‘s temperature: -5℃~50℃, relative humidity: < 75%RH.
CompleteShelf-Life: The Protective Mask is valid for 3 years with the above storage condition.
Production Batch Number: Printed on the bottom
Production Date: Printer on the bottom
Expiration Date: Printer on the bottom
Manufacturer: Guangdong Fengluyuan Biopharmaceutical Technology CO., LTD
Complete Address: Buildjing 2nd, Guantai Biotechnology Cooperation And Breeding Center 1# Taoyuan Road, Taiwan Hi-tech Park, Songshan Lake, Dongguan Guangdong China.
Phone: 0769—22426953

Cert & report

TEST REPORT OF CUP FFP3 PROTECTIVE MASK

RETURN

English

杯狀無閥口罩

[型號] FLY-BX-5A
[類別]：FFP3 NR
[包裝規格]：15片/盒
[尺寸] 15.3cm * 14cm * 6cm
[符合EN標準]：EN 149：2001 + A1：2009

EU DECLARATION OF CONFORMITY

詳情

【使用指征】 防護面罩用于防止固體和油性顆粒，液體和微生物，例如煤塵，水泥塵，酸霧，油漆霧，油煙，油霧，瀝青煙，焦?fàn)t煙等。一次性使用。
【限制條件】 不適合存在明火的工作場所（如焊接，鑄造等）；它不適用于專業防護用途，例如氧氣不足，有毒氣體環境。無醫療用途。
【使用前檢查】 使用前，請檢查包裝是否損壞，口罩主體是否損壞，變形或有其他明顯缺陷。
【運輸方式】 運輸本產品時，請使用提供的原始包裝。
【使用注意事項】 a）使用前請檢查口罩是否合適；
b）如果面部毛發穿過面部密封處，則不可能達到泄漏要求；
c）請不要在空氣質量低的環境下使用口罩，例如空氣中的嚴重污染物，氧氣不足；
d）請勿在易爆環境中使用口罩；
e）使用后，請按照當?shù)匾?guī)定丟棄口罩；
f）口罩僅供一次性使用，請勿重復使用。
g）在骯臟的工作場所中，連續或間歇使用同一臺防毒面具的時間不得超過8小時，否則可能會導致過濾器負荷過高。
h）從使用第一天開始，此呼吸器的最長服務時間為連續五（5）個日歷日（包括不使用的天數）。
請參閱制造商提供的信息。

適用場景

步驟1.用手握住呼吸器，使鼻子保持在您的指尖，使頭帶自由懸掛在手下方。
步驟2.用鼻托將呼吸器緊貼在您的臉上，并將其放在鼻梁上。
步驟3.拉伸并將頂部綁帶放在頭后部的高處。將底部綁帶拉到頭頂上，并放在耳朵下方。
步驟4.用雙手將鼻梁模制成鼻子的形狀。
步驟5.要進行測試是否合適：a）雙手捂住呼吸器，注意不要擾亂其位置； b）大力吸氣。如果邊緣漏氣，請重新調整皮帶的位置或調整皮帶的張力，以使其更舒適。
每次使用時，請仔細遵循這些安裝說明，以實現正確的安裝。儲存條件：該產品應儲存在通風良好，黑暗干燥的環境中。遠離火源，污染物和可能的污染源。另外，運輸倉庫的溫度：-5℃?50℃，相對濕度：< 75％RH。
有效期：在上述儲存條件下，口罩的有效期為3年。
生產批號：在底部印刷
生產日期：見底部
到期時間：見底部
印刷制造商：廣東豐綠源生物制藥技術有限公司
完整地址：中國廣東省東莞市松山湖臺灣高科技園區桃園路1號莞臺生物科技合作育成中心2號樓。
電話：0769—22426953